Heat Fab

Heat Fab

Heat Fab 4326SS Saf-T Vent 3" Diameter - 304 Storm Collar

$25.00 $19.85

 Storm Collar - For use on horizontal or vertical systems when a Heat-fab wall or roof penetration is not used or is not required. The storm collar may be tightened and sealed around the vent...

Add to Cart

Heat Fab

Heat Fab 4327SS Saf-T Vent 3" Diameter - 304 Support Clamp

$23.00 $18.85

 Outer Jacket Support Clamp - For use on horizontal systems to provide support at the required 6-foot intervals. May be used singly as a saddle to rest the vent in and hung from two rods or...

Add to Cart

Heat Fab

Heat Fab 4426SS Saf-T Vent 4" Diameter - 304 Storm Collar

$25.00 $19.85

 Storm Collar - For use on horizontal or vertical systems when a Heat-fab wall or roof penetration is not used or is not required. The storm collar may be tightened and sealed around the vent...

Add to Cart

Heat Fab

Heat Fab 4427SS Saf-T Vent 4" Diameter - 304 Support Clamp

$23.00 $18.85

  Outer Jacket Support Clamp - For use on horizontal systems to provide support at the required 6-foot intervals. May be used singly as a saddle to rest the vent in and hung from two rods or...

Add to Cart

Heat Fab

Heat Fab 4526SS Saf-T Vent 5" Diameter - 304 Storm Collar

$28.00 $20.85

 Storm Collar -For use with the Tall Cone Flashing (sold separately) or other roof flashings to provide support to vertical installations. The storm collar may be tightened and sealed around...

Add to Cart

Heat Fab

Heat Fab 4527SS Saf-T Vent 5" Diameter - 304 Support Clamp

$22.00 $17.45

 Outer Jacket Support Clamp - For use on horizontal systems to provide support at the required 6-foot intervals. May be used singly as a saddle to rest the vent in and hung from two rods or...

Add to Cart

Heat Fab

Heat Fab 4626SS Saf-T Vent EZ Seal - 6 Inch Diameter - 304 STORM COLLAR

$29.00 $22.65

 304 STORM COLLAR- Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam elbows is not adjustable. The pressure drop for each elbow is...

Add to Cart

Heat Fab

Heat Fab 4627SS Saf-T Vent 6" Diameter - 304 Support Clamp

$21.00 $16.45

 Outer Jacket Support Clamp - For use on horizontal systems to provide support at the required 6-foot intervals. May be used singly as a saddle to rest the vent in and hung from two rods or...

Add to Cart

Heat Fab

Heat Fab 4726SS Saf-T Vent 7" Diameter - 304 Storm Collar

$35.00 $27.65

  Storm Collar -For use with the Tall Cone Flashing (sold separately) or other roof flashings to provide support to vertical installations. The storm collar may be tightened and sealed around...

Add to Cart

Heat Fab

Heat Fab 4727SS Saf-T Vent 7" Diameter - 304 Support Clamp

$23.00 $18.85

 Outer Jacket Support Clamp - For use on horizontal systems to provide support at the required 6-foot intervals. May be used singly as a saddle to rest the vent in and hung from two rods or...

Add to Cart

Heat Fab

Heat Fab 4826SS Saf-T Vent EZ Seal - 8 Inch Diameter - 304 STORM COLLAR

$37.00 $28.85

 304 STORM COLLAR Heat Fab 4826SS Saf-T Vent EZ Seal 8" Diameter 304 STORM COLLAR Saf-T Vent EZ Seal AL29-4C Stainless Steel EZ Seal Catalog & Dimensional Data EZ...

Add to Cart

Heat Fab

Heat Fab 4827SS Saf-T Vent EZ Seal - 8 Inch Diameter - 304 SUPPORT CLAMP

$24.00 $19.25

 304 SUPPORT CLAMP Heat Fab 4827SS Saf-T Vent EZ Seal 8" Diameter 304 SUPPORT CLAMP Saf-T Vent EZ Seal AL29-4C Stainless Steel EZ Seal Catalog & Dimensional Data ...

Add to Cart

Heat Fab

Heat Fab 4927SS Saf-T Vent EZ Seal -9 Inch Diameter - 304 SUPPORT CLAMP

$29.00 $22.85

304 SUPPORT CLAMP Heat Fab 4927SS Saf-T Vent EZ Seal 9" Diameter 304 SUPPORT CLAMP Saf-T Vent EZ Seal AL29-4C Stainless Steel EZ Seal Catalog & Dimensional Data EZ Seal...

Add to Cart

Heat Fab

Heat Fab 5300CI Saf-T Vent EZ Seal - 3" Storm Collar & Rain Cap

$196.00 $128.95

 Heat Fab 5300CI Saf-T Vent EZ Seal - 3" Storm Collar & Rain Cap Heat Fab Saf-T Vent EZ Seal is the fastest and most reliable venting solution for Category I, II, III, and IV gas appliances...

Add to Cart

Heat Fab

Heat Fab 5381CI Saf-T Vent 3" Diameter - Roof Flashing 2" to 8" Pitch

$257.00 $166.95

 Pitched Cone Flashing- For use with single-wall or double-wall Saf-T Vent systems with vertical terminations. Can be used on roofs with a 2/12 - 8/12 pitch. This part comes with a tall storm...

Add to Cart

Heat Fab

Heat Fab 5382CI Saf-T Vent 3" Diameter - Roof Flashing Flat

$242.00 $159.95

Tall Cone Flashing- For use with single-wall or double-wall systems with vertical terminations. Can be used on flat roofs or slightly pitched roofs. This part comes with a tall storm collar and is of...

Add to Cart

Heat Fab

Heat Fab 5400CI Saf-T Vent EZ Seal - 4" Storm Collar & Rain Cap

$202.00 $130.95

 Rain Cap - Use as a termination on vertical systems. Category I and II appliances require a raincap or other device to prevent rainwater from entering the vent. Vent systems for positive...

Add to Cart

Heat Fab

Heat Fab 5481CI Saf-T Vent 4" Diameter - Roof Flashing 2" to 8" Pitch

$306.00 $204.95

 Pitched Cone Flashing- For use with single-wall or double-wall Saf-T Vent systems with vertical terminations. Can be used on roofs with a 2/12 - 8/12 pitch. This part comes with a tall storm...

Add to Cart

Heat Fab

Heat Fab 5482CI Saf-T Vent 4" Diameter - Roof Flashing Flat

$265.00 $171.95

Tall Cone Flashing- For use with single-wall or double-wall systems with vertical terminations. Can be used on flat roofs or slightly pitched roofs. This part comes with a tall storm collar and is of...

Add to Cart

Heat Fab

Heat Fab 5600CI Saf-T Vent EZ Seal - 6" Storm Collar & Rain Cap

$218.00 $140.95

  Rain Cap - Use as a termination on vertical systems. Category I and II appliances require a raincap or other device to prevent rainwater from entering the vent. Vent systems for positive...

Add to Cart

Heat Fab

Heat Fab 5691CI Saf-T Vent 6" Diameter Insulated Wall Penetration

$352.00 $235.95

 Wall Penetration Assembly - without Screen - Use to penetrate any combustible or non-combustible wall. This part is a thimble only and does not include any vent. Order enough vent to pass...

Add to Cart

Heat Fab

Heat Fab 5891CI Saf-T Vent 8" Diameter Insulated Wall Penetration

$456.00 $334.95

 Wall Penetration Assembly - without Screen - Use to penetrate any combustible or non-combustible wall. This part is a thimble only and does not include any vent. Order enough vent to pass...

Add to Cart

Heat Fab

Heat Fab 7000RTVL RTV Sealant - 550 DEG MAX - 10 oz Tube

$144.00 $81.95

 Heat Fab 7000RTVL RTV Sealant. Use to seal the system. In order to have a UL Listed system, Saf-T Vent CI Plus parts without a factory adhered seal must be installed with approved RTV...

Add to Cart

Heat Fab

Heat Fab 7000TUBE-10 Drain Tube Hose Kit - 3/8" x 10' Long

$47.00 $30.95

 Condensate Drain Tube Kit- This kit contains a length of 3/8" diameter high temperature silicone rubber tubing, a 3/8" spring clamp, and two cable ties. The silicone tubing is rated for 500...

Add to Cart

Heat Fab

Heat Fab 7001SIL-5 Silicone Gasket Lube - 5 oz Tube

$31.00 $19.95

  Heat Fab 7001SIL-5 Silicone Gasket Lube - 5 oz Tube. Apply lubricant to the seal to improve ease of installation before connecting parts. Allows for easier assembly and disassembly. Heat Fab...

Add to Cart

Heat Fab

Heat Fab 7001TUBE Drain Tube Hose Kit - 1/2" x 10' Long

$91.00 $58.95

 Condensate Drain Tube Kit- This kit contains a length of 1/2" diameter high temperature silicone rubber tubing, a 1/2" spring clamp, and two cable ties. The silicone tubing is rated for 500...

Add to Cart

Heat Fab

Heat Fab 73EXPKIT Saf-T Vent EZ Seal Field Expander Kit

$83.00 $52.95

  A field expander kit is available for 3" diameter Saf-T Vent installations. The field expander is a tool the installer can use to recreate the male taper on a cutoff piece of pipe. Heat Fab...

Add to Cart

Heat Fab

Heat Fab 91201 Saf-T Vent EZ Seal - 12 Inch Diameter - 6" Straight Length

$102.00 $65.95

Heat Fab 91201 Saf-T Vent EZ Seal - 12 Inch Diameter - 6" Straight Length   Heat Fab Saf-T Vent EZ Seal is the fastest and most reliable venting solution for Category I, II, III, and IV gas...

Add to Cart

Heat Fab

Heat Fab 91202 Saf-T Vent EZ Seal - 12 Inch Diameter - 12" Straight Length

$153.00 $98.95

Heat Fab 91202 Saf-T Vent EZ Seal - 12 Inch Diameter - 12" Straight Length   Heat Fab Saf-T Vent EZ Seal is the fastest and most reliable venting solution for Category I, II, III, and IV gas...

Add to Cart

Heat Fab

Heat Fab 91204 Saf-T Vent EZ Seal - 12 Inch Diameter - 18" Straight Length

$223.00 $143.95

Heat Fab 91204 Saf-T Vent EZ Seal - 12 Inch Diameter - 18" Straight Length   Heat Fab Saf-T Vent EZ Seal is the fastest and most reliable venting solution for Category I, II, III, and IV gas...

Add to Cart

Heat Fab

Heat Fab 91205 Saf-T Vent EZ Seal - 12 Inch Diameter - 24" Straight Length

$273.00 $176.95

Heat Fab 91205 Saf-T Vent EZ Seal - 12 Inch Diameter - 24" Straight Length   Heat Fab Saf-T Vent EZ Seal is the fastest and most reliable venting solution for Category I, II, III, and IV gas...

Add to Cart

Questions & Phone Orders

SDS Supply Corp.
13731 S. Route 30, Unit 105
Plainfield, IL 60544
Call us: (800) 236-9029

Shop with Confidence

Safe & Secure shopping online. Learn more

Payment Methods

Top