Heat Fab

Heat Fab

Heat Fab 9316 Saf-T Vent EZ Seal - 3" Conduit Tee

$92.00 $56.95

 Conduit Tee - A conduit tee, when installed horizontally, may be fitted with a drain tee cover to create a condensate drain. Due to its high pressure drop, the conduit tee is generally not...

Add to Cart

Heat Fab

Heat Fab 9316B Saf-T Vent EZ Seal - 3" Boot Tee

$172.00 $106.95

 Boot Tee - Use vertically or horizontally to add appliances into a common-vent system. When installed horizontally, the male end of the tee body may be capped off with a tee cover to allow for...

Add to Cart

Heat Fab

Heat Fab 9317 Saf-T Vent EZ Seal - 3" Tee Cover

$37.00 $22.95

 Tee Cover- Used to cap off the male end of a tee that is installed horizontally. The combination of a tee and a tee cover allows easy access for the periodic inspection of the vent system. 3”...

Add to Cart

Heat Fab

Heat Fab 9317D Saf-T Vent EZ Seal - 3" Condensate Tee Cover 3/8" Drain

$57.00 $34.95

 Tee Cover with Drain Fitting - Use at the base of a tee or boot tee to drain away condensate from a vent system. This type of tee cover may also be used on the leg of a tee that is installed...

Add to Cart

Heat Fab

Heat Fab 9416 Saf-T Vent EZ Seal - 4" Conduit Tee

$97.00 $59.95

 Conduit Tee - A conduit tee, when installed horizontally, may be fitted with a drain tee cover to create a condensate drain. Due to its high pressure drop, the conduit tee is generally not...

Add to Cart

Heat Fab

Heat Fab 9416B Saf-T Vent EZ Seal - 4" Boot Tee

$172.00 $106.95

Boot Tee - Use vertically or horizontally to add appliances into a common-vent system. When installed horizontally, the male end of the tee body may be capped off with a tee cover to allow for future...

Add to Cart

Heat Fab

Heat Fab 9417 Saf-T Vent EZ Seal - 4" Tee Cover

$37.00 $23.95

 Tee Cover- Used to cap off the male end of a tee that is installed horizontally. The combination of a tee and a tee cover allows easy access for the periodic inspection of the vent system. 4”...

Add to Cart

Heat Fab

Heat Fab 9417D Saf-T Vent EZ Seal - 4" Condensate Tee Cover 3/8" Drain

$64.00 $39.95

 Tee Cover with Drain Fitting - Use at the base of a tee or boot tee to drain away condensate from a vent system. This type of tee cover may also be used on the leg of a tee that is installed...

Add to Cart

Heat Fab

Heat Fab 9516 Saf-T Vent EZ Seal - 5 Inch Diameter - 5OUT / 5IN / 5TAP POS

$109.00 $66.95

5OUT / 5IN / 5TAP POS- Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam elbows is not adjustable. The pressure drop for each elbow is equivalent...

Add to Cart

Heat Fab

Heat Fab 9517 Saf-T Vent EZ Seal - 5 Inch Diameter - TEE COVER

$47.00 $32.95

TEE COVER- Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam elbows is not adjustable. The pressure drop for each elbow is equivalent to 3 feet of...

Add to Cart

Heat Fab

Heat Fab 9616 Saf-T Vent EZ Seal - 6" Conduit Tee

$133.00 $81.95

 Conduit Tee - A conduit tee, when installed horizontally, may be fitted with a drain tee cover to create a condensate drain. Due to its high pressure drop, the conduit tee is generally not...

Add to Cart

Heat Fab

Heat Fab 9616B Saf-T Vent EZ Seal - 6" Boot Tee

$263.00 $162.95

 Boot Tee - Use vertically or horizontally to add appliances into a common-vent system. When installed horizontally, the male end of the tee body may be capped off with a tee cover to allow for...

Add to Cart

Heat Fab

Heat Fab 9616BAR Saf-T Vent EZ Seal - 6" Barometric Tee

$133.00 $81.95

 Heat Fab 9616BAR Saf-T Vent EZ Seal Stainless Steel 6 Inch Diameter Barometric Tee Heat Fab 9616BAR 6” Diameter Barometric Tee Saf-T Vent EZ Seal AL29-4C Stainless Steel EZ...

Add to Cart

Heat Fab

Heat Fab 9816 Saf-T Vent EZ Seal - 8 Inch Diameter - 8OUT / 8IN / 8TAP POS

$164.00 $100.95

 8OUT / 8IN / 8TAP POS- Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam elbows is not adjustable. The pressure drop for each elbow is...

Add to Cart

Heat Fab

Heat Fab 9816B Saf-T Vent EZ Seal - 8" Boot Tee

$339.00 $210.95

 Boot Tee - Use vertically or horizontally to add appliances into a common-vent system. When installed horizontally, the male end of the tee body may be capped off with a tee cover to allow for...

Add to Cart

Heat Fab

Heat Fab 9817 Saf-T Vent EZ Seal - 8 Inch Diameter - TEE COVER

$86.00 $52.95

  TEE COVER- Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam elbows is not adjustable. The pressure drop for each elbow is equivalent to 3...

Add to Cart

Heat Fab

Heat Fab 9817D Saf-T Vent EZ Seal - 8" Condensate Tee Cover

$112.00 $68.95

 Tee Cover with Drain Fitting - Use at the base of a tee or boot tee to drain away condensate from a vent system. This type of tee cover may also be used on the leg of a tee that is installed...

Add to Cart

Questions & Phone Orders

SDS Supply Corp.
13731 S. Route 30, Unit 105
Plainfield, IL 60544
Call us: (800) 236-9029

Shop with Confidence

Safe & Secure shopping online. Learn more

Payment Methods

Top