AquaMotion AMH2K-RX Outdoor Circulator for Tankless - Flanged - SDS Supply Corp.

AquaMotion AMH2K-RX Outdoor Circulator for Tankless - Flanged

AquaMotion

  • $545.95
    Unit price per 

Only 4 left!
 

Availabilty

Usually Ships Same Business Day if ordered by 12pm CST

The AMH2K-RX Kit includes a AMR-SFV1AXLT1 flanged circulator with outdoor control box is designed for the recirculation of domestic hot water on systems with externally mounted tankless hot water heaters. The circulator is supplied with both a built-in timer and a built in *Aquastat to minimize heat loss from the hot supply and hot water return lines. A built-in check valve stops hot water from flowing to the point of use via the return line. A standard grounded 115V cord and plug allows the circulator to be plugged into a standard 115V grounded receptacle. The circulator is freeze protected. Freeze protection starts the circulator to the normal operation when the temperature raises. The circulator is intended to be installed outdoors against a structure with the control box cover facing up. Tabs are included on both the control box cover and base that allow the box cover to be secured against rain, wind and tampering. Filters protect the control from insects & bugs.

FEATURES:

  • Includes: AMR-SFV1AXLT1 (flanged body) and FK75S 3/4″ Stainless Flanges
  • For Outdoor Installed Tankless Heater without built-in Pump on Dedicated Return Line
  • Primary Market Southern Tier of the US
  • Outdoor installation saves on expensive air intake, exhausts
  • Easy to service outdoor installed pump
  • Pump freeze protected and water and sprinkler safe
  • Greater choice of tankless models
  • Automatic, built-in thermostat/switch designed for hot climate (115-125 F degrees), timer and 10 ft. line cord
  • Clear cover with Timer visibility
  • Meets Title 24 California (only with Aquastat)

SPECIFICATIONS:

  • Maximum Shut-off Head: 16 feet 
  • Maximum Flow: 20 gpm 
  • Maximum Operating Pressure: 125 psi
  • Maximum Ambient Temperature: 104°F
  • Minimum Inlet Pressure: 2 psi
  • Maximum Water Temp: 230°F (110°C)
  • Electrical Rating: 120V, 60Hz, .79A
  • Aquastat setting 115° – 125°F
  • 10 Foot Line Cord with grounded plug

Materials of Construction

  • Pump housing (volute)......................Stainless Steel
  • Motor housing……………………..….Powder Coated Steel
  • Outdoor Box………………………… Composite
  • Seals &Gaskets……………………….Silicone & EPDM Rubber
  • Internal Wetted Components…….…Stainless Steel & Ceramic
  • Bearings………………………............Carbon Impregnated Brass

KIT CONTAINS:

  • (1) Pump model AMR-SFV1AXLT1 (flanged body) 

  • FK75S 3/4″ Stainless Flanges

DOCUMENTS:

 

pdfspec.jpg


View Instruction Sheet
pdfspec.jpg
View Submittal Data Sheet
pdfinstall.jpg
View Brochure

aquamotion-tool-ip.png

 

 

logo-aquamotion-usa.jpg


We Also Recommend