Commercial

Heat Fab

Heat Fab 5400CI Saf-T Vent EZ Seal - 4" Storm Collar & Rain Cap

$216.00 $151.95

 Rain Cap - Use as a termination on vertical systems. Category I and II appliances require a raincap or other device to prevent rainwater from entering the vent. Vent systems for positive pressure appliances may omit the raincap if there are other...

Add to Cart

Heat Fab

Heat Fab 7000RTVL RTV Sealant - 550 DEG MAX - 10 oz Tube

$155.00 $108.95

 Heat Fab 7000RTVL RTV Sealant. Use to seal the system. In order to have a UL Listed system, Saf-T Vent CI Plus parts without a factory adhered seal must be installed with approved RTV sealants. Also, use RTV Sealant when connecting Saf-T vent EZ...

Add to Cart

Heat Fab

Heat Fab 7001SIL-5 Silicone Gasket Lube - 5 oz Tube

$33.00 $23.95

  Heat Fab 7001SIL-5 Silicone Gasket Lube - 5 oz Tube. Apply lubricant to the seal to improve ease of installation before connecting parts. Allows for easier assembly and disassembly. Heat Fab 7001SIL-5 Silicone Gasket Lube 5 ounce tube Apply...

Add to Cart

Heat Fab

Heat Fab 7001TUBE Drain Tube Hose Kit - 1/2" x 10' Long

$98.00 $68.95

 Condensate Drain Tube Kit- This kit contains a length of 1/2" diameter high temperature silicone rubber tubing, a 1/2" spring clamp, and two cable ties. The silicone tubing is rated for 500 degree F, and is translucent to allow inspection of the...

Add to Cart

Heat Fab

Heat Fab SC04ADEZ Saf-T Vent SC 4"/7" Concentric Adapter from EZ Seal

$104.00 $72.95

 Heat Fab SC04ADEZ Saf-T Vent SC 4"/7" Concentric Adapter from EZ. Single Wall Adapter/Appliance Adapter - Use to transition from single-wall to Saf-T Vent SC. The male end connects to Saf-T Vent EZ Seal or Saf-T Vent appliance adapters and flue...

Add to Cart

Heat Fab

Heat Fab SC04AJ Saf-T Vent SC 4"/7" Diameter - Adjustable Straight Length

$227.00 $158.95

 Heat Fab SC04AJ Saf-T Vent SC 4"/7" Diameter - Adjustable Straight Length. Install vent with a continuous pitch of 1/4" per foot, sloping upward toward the termination (unless otherwise specified by the appliance manufacturer). 4"/7" Diameter ...

Add to Cart

Heat Fab

Heat Fab SC04DRN Saf-T Vent SC 4"/7" Diameter - In-Line Drain Section w 1/2" Drain

$211.00 $147.95

 Heat Fab SC04DRN Saf-T Vent SC 4"/7" Diameter - In-Line Drain Section with 1/2" Drain. Vertical/Horizontal In-Line Drain Section - Use to drain away condensate from the vent system. The unique design of this part allows it to be installed in a...

Add to Cart

Heat Fab

Heat Fab SC04E45 Saf-T Vent SC 4"/7" Diameter - 45

$164.00 $114.95

 Heat Fab SC04E45 Saf-T Vent SC 4"/7" Diameter - 45° Elbow. Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam elbows is not adjustable. 4"/7" Diameter 45° Elbow Saf-T Vent SC Concentric...

Add to Cart

Heat Fab

Heat Fab SC04E90 Saf-T Vent SC 4"/7" Diameter - 90

$185.00 $129.95

 Heat Fab SC04E90 Saf-T Vent SC 4"/7" Diameter - 90° Elbow. Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam elbows is not adjustable. 4"/7" Diameter 90° Elbow Saf-T Vent SC Concentric...

Add to Cart

Heat Fab

Heat Fab SC04FS Saf-T Vent SC 4"/7" Diameter - 10x10 Firestop-Support-Wall Plate

$33.00 $23.95

 Heat Fab SC04FS Saf-T Vent SC 4"/7" Diameter - 10x10 Firestop-Support-Wall Plate. Fire Stop / Support / Wall Plate- A fire stop may be required anytime Saf-T Vent SC penetrates combustible floors, walls, or ceilings. Remove any insulating material...

Add to Cart

Heat Fab

Heat Fab SC04FSA Saf-T Vent SC 4"/7" Diameter - 12x12 Firestop-Support-Wall Plate

$29.00 $20.95

 Heat Fab SC04FSA Saf-T Vent SC 4"/7" Diameter - 12x12 Firestop-Support-Wall Plate. Fire Stop / Support / Wall Plate- A fire stop may be required anytime Saf-T Vent SC penetrates combustible floors, walls, or ceilings. Remove any insulating...

Add to Cart

Heat Fab

Heat Fab SC04HT Saf-T Vent SC 4"/7" Horizontal Termination Adapter

$115.00 $80.95

 Horizontal Termination Adapter- Use to complete the Saf-T Vent SC system after penetrating an exterior wall. Standard Saf-T Vent terminations connect directly to the adapter. The screened openings release excess heat from the system and must not...

Add to Cart

Heat Fab

Heat Fab SC04L24 Saf-T Vent SC 4"/7" Diameter - 24" Straight Length

$167.00 $116.95

 Heat Fab SC04L24 Saf-T Vent SC 4"/7" Diameter - 24" Straight Length. Install vent with a continuous pitch of 1/4" per foot, sloping upward toward the termination (unless otherwise specified by the appliance manufacturer). 4"/7" Diameter ...

Add to Cart

Heat Fab

Heat Fab SC04L36 Saf-T Vent SC 4"/7" Diameter - 36" Straight Length

$224.00 $156.95

 Heat Fab SC04L36 Saf-T Vent SC 4"/7" Diameter - 36" Straight Length. Install vent with a continuous pitch of 1/4" per foot, sloping upward toward the termination (unless otherwise specified by the appliance manufacturer). 4"/7" Diameter ...

Add to Cart

Heat Fab

Heat Fab SC04RC Saf-T Vent 4" Diameter - Rain Cap

$164.00 $114.95

 Rain Cap - Use as a termination on vertical systems. Category I and II appliances require a raincap or other device to prevent rainwater from entering the vent. Vent systems for positive pressure appliances may omit the raincap if there are other...

Add to Cart

Heat Fab

Heat Fab SC04SUP Saf-T Vent SC 4"/7" Diameter - 0" Clearance Support Clamp

$13.00 $9.95

 Heat Fab SC04SUP Saf-T Vent SC 4"/7" Diameter - 0" Clearance Support Clamp. 0" Clearance Horizontal / Vertical Support Clamp - For use on horizontal or vertical systems to provide support at zero clearance to combustible materials. When any...

Add to Cart

Heat Fab

Heat Fab SC04SUP1 Saf-T Vent SC 4"/7" Diameter - 1" Clearance Support Clamp

$24.00 $16.95

 Heat Fab SC04SUP1 Saf-T Vent SC 4"/7" Diameter - 1" Clearance Support Clamp. 1" Clearance Support Clamp - Provides support to Saf-T Vent SC systems that require 1 inch clearance to combustible materials. When any horizontal run of Saf-T Vent SC...

Add to Cart

Heat Fab

Heat Fab SC04TAD3 Saf-T Vent SC 4"/7" Diameter - Air Intake Tee, 3" Intake Connection

$171.00 $119.95

 Air Intake Tee - Use to begin a Sealed Combustion system. The male end connects to Saf-T Vent EZ Seal or Saf-T Vent appliance adapters and flue collars. The tap on the outer wall should be connected to the combustion air inlet on the appliance...

Add to Cart

Heat Fab

Heat Fab SC04TAD4 Saf-T Vent SC 4"/7" Diameter - Air Intake Tee, 4" Intake Connection

$188.00 $131.95

 Air Intake Tee - Use to begin a Sealed Combustion system. The male end connects to Saf-T Vent EZ Seal or Saf-T Vent appliance adapters and flue collars. The tap on the outer wall should be connected to the combustion air inlet on the appliance...

Add to Cart

Heat Fab

Heat Fab SC04TCF Saf-T Vent SC 4"/7" Diameter - Flashing, Flat - 2/12 Pitch

$71.00 $49.95

 Use as a vertical roof penetration and support for flat roof installations. This part must be installed with a storm collar (ordered separately). Hardware is not included with the tall cone flashing; attach to structure using best construction...

Add to Cart

Heat Fab

Heat Fab SC04TCFA Saf-T Vent SC 4"/7" Diameter - Flashing, 2/12 - 6/12 Pitch

$80.00 $56.95

 Use as a vertical roof penetration and support for flat roof installations. This part must be installed with a storm collar (ordered separately). Hardware is not included with the tall cone flashing; attach to structure using best construction...

Add to Cart

Heat Fab

Heat Fab SC04TCFB Saf-T Vent SC 4"/7" Diameter - Flashing, 6/12 - 12/12 Pitch

$84.00 $58.95

  Use as a vertical roof penetration and support for flat roof installations. This part must be installed with a storm collar (ordered separately). Hardware is not included with the tall cone flashing; attach to structure using best construction...

Add to Cart

Heat Fab

Heat Fab SC04VSL Saf-T Vent SC 4"/7" Diameter - Vertical Support Leg

$69.00 $48.95

 Heat Fab SC04VSL Saf-T Vent SC 4"/7" Diameter - Vertical Support Leg. Vertical Support Leg - For use on vertical systems to provide support. The 20-gauge stainless steel support legs can be used below or above the roof, and can be used in pairs...

Add to Cart

Heat Fab

Heat Fab SC04VT Saf-T Vent SC 4"/7" Diameter - Vertical Termination Adapter

$188.00 $131.95

 Vertical Termination Adapter - Use to complete the Saf-T Vent SC system on vertical installations. Standard Saf-T Vent terminations connect directly to the adapter. The screened openings release excess heat from the system and must not be blocked...

Add to Cart

Questions & Phone Orders

SDS Supply Corp.
13731 S. Route 30, Unit 105
Plainfield, IL 60544
Call us: (800) 236-9029

Shop with Confidence

Safe & Secure shopping online. Learn more

Payment Methods

Top