Commercial

Heat Fab

Heat Fab 7000TUBE-10 Drain Tube Hose Kit - 3/8" x 10' Long

$50.00 $35.95

 Condensate Drain Tube Kit- This kit contains a length of 3/8" diameter high temperature silicone rubber tubing, a 3/8" spring clamp, and two cable ties. The silicone tubing is rated for 500 degree F, and is translucent to allow inspection of the...

Add to Cart

Heat Fab

Heat Fab 7001SIL-5 Silicone Gasket Lube - 5 oz Tube

$33.00 $23.95

  Heat Fab 7001SIL-5 Silicone Gasket Lube - 5 oz Tube. Apply lubricant to the seal to improve ease of installation before connecting parts. Allows for easier assembly and disassembly. Heat Fab 7001SIL-5 Silicone Gasket Lube 5 ounce tube Apply...

Add to Cart

Heat Fab

Heat Fab 9301PAL Saf-T Vent EZ Seal - 3" Paloma Adapter

$79.00 $55.95

 Saf-T Vent EZ Seal - 3" Paloma Adapter 3” Paloma Adapter 9301PAL Saf-T Vent EZ Seal AL29-4C Stainless Steel Works on the following untits: Rheem Pronto! 4.2 / RTG-42 Norwitz N-042 Paloma PH-16UFN, PH-16UFH, PH-16FS EZ Seal...

Add to Cart

Heat Fab

Heat Fab 9314LR Saf-T Vent EZ Seal - 3 Inch Diameter - 90

$101.00 $70.95

  90° Loose Radius Elbow- Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam elbows is not adjustable. The pressure drop for each elbow is equivalent to 10 feet of vent. Heat Fab 9314LR Saf-T...

Add to Cart

Heat Fab

Heat Fab 9402 Saf-T Vent EZ Seal - 4 Inch Diameter - 12" Straight Length

$46.00 $32.95

 12" Length- Install vent with a continuous pitch of 1/4” per foot, sloping upward toward the termination (unless otherwise specified by the appliance manufacturer). It is important to provide adequate support to a Saf-T Vent EZ Seal system...

Add to Cart

Heat Fab

Heat Fab 9407 Saf-T Vent EZ Seal - 4 Inch Diameter - 37.5" Straight Length

$107.00 $74.95

 37.5" Length- Install vent with a continuous pitch of 1/4” per foot, sloping upward toward the termination (unless otherwise specified by the appliance manufacturer). It is important to provide adequate support to a Saf-T Vent EZ Seal system...

Add to Cart

Heat Fab

Heat Fab 9410 Saf-T Vent EZ Seal - 4 Inch Diameter - 30

$109.00 $76.95

  30° Elbow- Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam elbows is not adjustable. The pressure drop for each elbow is equivalent to 3 feet of vent. 4” Diameter 30° Elbow Saf-T...

Add to Cart

Heat Fab

Heat Fab 9411 Saf-T Vent EZ Seal - 4 Inch Diameter - 45

$109.00 $76.95

 45° Elbow- Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam elbows is not adjustable. The pressure drop for each elbow is equivalent to 5 feet of vent for 3 and 4 inch diameters. 4” Diameter...

Add to Cart

Lazy Hill

Lazy Hill 999204 Canterbury Mailbox Post - White

$325.99 $226.95

Our handsome mail posts are as durable as they are stylish, providing proud service no matter the weather, season after season. All are made of cedar and stained white. All mail box posts are of sufficient length to allow for up to a 30" burial  ...

Add to Cart

Taco

Taco 0011-009RP Replacement Cartridge Assembly

$249.80 $176.95

  Taco 0011-009RP Replacement Cartridge Assembly Taco 0011-009RP Replacement Cartridge Assembly For Cast Iron Models For Taco 0011 Pumps     CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals, including...

Add to Cart

Taco

Taco 003-B4-PNP Bronze Plumb N' Plug Circulator - 1/40 HP - 3/4" Sweat

$537.70 $295.95

 Taco Plumb n' Plug® Circulators periodically re-circulate hot water through the domestic piping system to decrease the delivery time to outlet fixtures and reduce wasted water. These UL-listed units feature quiet, efficient operation and low...

Add to Cart

Taco

Taco 007-042RP Replacement Cartridge Assembly

$113.30 $94.21

  Taco 007-042RP Replacement Cartridge Assembly Taco 007-042RP Replacement Cartridge Assembly For Cast Iron Models For Taco 007 Pumps     CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals, including lead,...

Add to Cart

Taco

Taco 009-021RP Replacement Cartridge Assembly

$190.60 $134.95

  Taco 009-021RP Replacement Cartridge Assembly Taco 009-021RP Replacement Cartridge Assembly For Cast Iron Models For Taco 009 Pumps     CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals,...

Add to Cart

Taco

Taco 110 Cast-Iron In-Line Circulator - Red Baron

$628.30 $290.99

 The Taco 110-24 Cast Iron In-Line Circulator is designed to efficiently circulate heated or chilled water in residential or light commercial Hydronic Systems. These circulators may also be used for zoning large installations and are available in...

Add to Cart

Taco

Taco 110-251F - Ductile Iron Freedom Flanges - 3/4" NPT

$18.00 $9.69

 Taco 110-251F Ductile Iron Freedom Flanges, 3/4" NPT, Includes Two Flanges, For Bolts, and Four Nuts. Taco 110-251F 3/4” NPT Ductile Iron Freedom Flange Sets Stronger than Cast Iron Easy-On, Easy-Off with a common adjustable wrench ...

Add to Cart

Taco

Taco 110-275RP Seal Kit

$56.60 $41.21

  Taco 110-275RP Seal Kit for Taco 110 through 120 pumps. Taco 110-275RP Seal Kit For Taco 110 through 120 pumps     CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals, including lead, which are known to...

Add to Cart

Taco

Taco 132-096 Pump Motor - 1/2 HP - 115V/230V/60/1Ph

$627.00 $581.99

  Taco 132-096 Pump Motor for 1600 Series pumps is 1/2 HP and 115 / 230 Volts Taco 132-096 1/2 HP 115/230 Volts - 60 Hertz - 1 Phase Motor Only ODP - Open Open Drip-Proof For Hot Water Circulating Pump 1600 Series Pump Motor...

Add to Cart

Taco

Taco 138-119 Pump Motor - 1 HP - 115V/230V/60/1Ph

$848.00 $688.69

 Taco 138-119 Pump Motor - 1 HP - 115V/230V/60/1Ph Taco 138-119 Pump motor 1 HP 115/230 Volts - 60 Hertz - 1 Phase Motor Only ODP - Open Open Drip-Proof For Hot Water Circulating Pump 1600 Series Pump Motor Replacement NOTE:...

Add to Cart

Taco

Taco 1661-022 Pump Motor - 1/2 HP - 200-230V/460V/60/3Ph

$714.00 $420.95

  Taco 1661-022 Pump Motor - 1/2 HP - 200-230V/460V/60/3Ph - Replaces the 132-097 & 132-066 Motors Taco 1661-022 Pump Motor 1/2 HP 200-230/460 Volts - 60 Hertz -  3 Phase Motor Only ODP - Open Open Drip-Proof For Hot Water...

Add to Cart

Taco

Taco 329-3 Cast Iron Pressure Reducing Valve - Sweat

$100.90 $47.10

  Taco 329-3 Cast Iron Pressure Reducing Valve - Sweat. Taco Boiler Feed Valves automatically feed water to a system whenever pressure in the system drops below the pressure setting of the valve. Taco 329-3 Pressure Reducing Valve Cast Iron...

Add to Cart

Taco

Taco 554-5 Under Sink Installation Kit

$86.20 $50.95

 Taco 554-5 Under Sink Installation Kit for 006-CT and 008-CT Taco 554-4 Motion Sensor Starter Kit For use with taco 006-CT and 008-CT Includes: (2) Copper T's and 2 Flex Hoses   CALIFORNIA PROPOSITION 65 WARNING: This product...

Add to Cart

Taco

Taco 555-050RP Zone Valve Power Head

$129.80 $91.95

  Replacement power head for Taco 570 Series zone valves. The Gold Series is the industry standard for Hydronic heating applications. The quiet and dependable operation has made this valve an industry leader for decades. The manual open lever and...

Add to Cart

Taco

Taco 555-154RP Zone Valve Power Head (Series 560)

$156.60 $110.95

 Replacement power head for Taco 560 Series zone valves. Zone Valve Power Head Easy to Install For Taco Series 560 Zone Valves (560, 561, & 562) Parts Breakown Installation Instructions   CALIFORNIA PROPOSITION 65 WARNING: This...

Add to Cart

Taco

Taco 557-G3 Geothermal Zone Valve - 1" Sweat 2-Way

$355.90 $199.77

  The Taco 557-G3 Geothermal Zone Valve is designed for high head, open system zone control. The unique end switch design permits control of the heat pump by the valve. This allows movement of cold water into the coil before the heat pump actually...

Add to Cart

Taco

Taco 561-5 Zone Valve - 3/4" Sweat 3-Way By-Pass

$304.40 $182.31

  A 3-Way bypass version of the 570 Gold Series. This valve is used to control the flow to a fan coil or terminal heating unit. Taco 561-5 Zone Valve 3/4" Sweat Zone Valve 3-Way By-Pass A 3-Way bypass version of the 570 Gold Series Used to...

Add to Cart

Taco

Taco 563-2 Temperature Aquastat

$50.40 $31.03

  When using only the Temperature Aquastat, the circulator cycles continuously to maintain a temperature between 95º F. and 115º F. For maximum convenience and flexibility, you can retrofit the Temperature Aquastat to any Taco "00"...

Choose Options

Taco

Taco 571-2 Zone Valve - 3/4" Sweat 2-Way

$195.20 $112.06

  The Taco 571-2 3/4" Sweat Gold Series Zone Valve is the industry standard for Hydronic heating applications. The quiet and dependable operation has made this valve an industry leader for decades. The manual open lever and twist off head makes...

Add to Cart

Taco

Taco 950-665BRP Seal Kit

$670.00 $473.95

  Taco 950-665BRP Seal Kit Taco 950-665BRP Seal Kit     CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals, including lead, which are known to the State of California to cause cancer, birth...

Add to Cart

Taco

Taco 953-1549-3BRP Seal Kit

$504.00 $356.95

  Taco 953-1549-3BRP Seal Kit for KV, CI, FI Pumps. Type E Seal. 1-1/8" Diameter. Taco 953-1549-3BRP Seal Kit for KV, CI, FI Pumps Type E 1-1/8" Diameter     CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to...

Add to Cart

Taco

Taco SFL-075T Brass NSF Shut-Off Freedom Swivel-Flange Set - 3/4" NPT

$62.90 $37.14

  The Taco Shut-Off Swivel-Flange is a combination full port shut-off ball valve and swivel companion flange for most Taco circulators. The simple quarter turn, lever handle operation allows for easy isolation, removal and service of circulators...

Add to Cart

Taco

Taco SR504-4 Switching Relay - 4 Zone

$282.80 $182.00

  The Taco Switching Relay is the best choice for all your zoning needs, with advanced timer and boiler functions, external diagnostic lights, switchable priority and contractor friendly PC board layouts. Combined with the time proven reliability...

Add to Cart

Taco

Taco SR504-EXP-4 Expandable Switching Relay - 4 Zone

$304.40 $190.00

 The Taco Switching Relay is the best choice for all your zoning needs, with advanced timer and boiler functions, external diagnostic lights, switchable priority and contractor friendly PC board layouts. Combined with the time proven reliability of...

Add to Cart

Questions & Phone Orders

SDS Supply Corp.
13731 S. Route 30, Unit 105
Plainfield, IL 60544
Call us: (800) 236-9029

Shop with Confidence

Safe & Secure shopping online. Learn more

Payment Methods

Top