AquaMotion AMH1K-6ODRZT1  Recirc Kit for Tankless Heater - SDS Supply Corp.

AquaMotion AMH1K-6ODRZT1 Recirc Kit for Tankless Heater

AquaMotion

  • $418.95
    Unit price per 

Only 1 left!

Availabilty

Usually Ships Same Business Day if ordered by 12pm CST

For TANKLESS HEATER WITHOUT BUILT-IN PUMP for Single Pipe Systems.

AquaMotion Stainless Steel Circulator with a built-in timer and a 10 Ft line cord. AMK-ODR bypass valve kit (ODR Valve, 2 Ft. Stainless Steel Hose & Tee), Bypass Tee 3/4” MNPT x 3/4” MNPT x 3/8” OD Compression Two 3/4″ NPT Male Tail Pieces with 1” Union Nuts and Gaskets, 2 Ft. Stainless Hose.The AquaMotion ODR Valve is a small, quiet, lead free stainless/brass hot water recirculation valve for single pipe systems.  It installs at the fixture furthest from the tankless hot water heater. It acts in conjunction with the circulator to supply hot water using the Built-in Timer. The ODR Valve mounts below the fixture between hot and cold supply lines. When hot water is called with the Built-in Timer, the circulator forces the cooled hot water in the hot water line into the cold supply line which returns it to the hot water heater. As hotter water reaches the ODR Valve it closes until a 95°F temperature is reached at which point the valve automatically adjusts to maintain this temperature.

Note: Circulator Unions are 1" Male IP, bypass is 3/8" compression. Line cord is 10' with a 3-prong grounded 115V plug. The
under-sink valve and Tee connections are 3/8” compression x 3/ 8” compression x ½” NPS.

This is not an anti-scald device

The AMH1K-6ODRZT1 Kit includes:

  • AM6 AquaMotion Circulator with check valve, built-in timer, 10 Ft line cord and flow control to pass 1 GPM
  • ODR Undersink Valve
  • Tee
  • 3/8” Compression 24” hose
  • ½” x ½” Bypass tee is ¾” MNPT x ¾” MNPT x 3/8” compression
  • Two 3/4" NPT Male Tail Pieces with 1” Union Nuts and Gaskets
  • 2 Ft. Stainless Braided Hose, 3/8” compression x 3/8” Compression
  • 3/4” NPT x 3/8” Compression Tee Fitting (Contains Check Valve)


Specifications:

  • Material: Stainless Steel
  • Check Valve: Yes
  • Pump Speed: Single Speed
  • Corded: Yes
Tools Needed:
  • 5/8” open end wrench
  • 1” open end wrench or an adjustable crescent wrench that opens to 1”
  • Two Pipe wrenches that open to 1.5”
  • NFS Pipe Dope or Teflon Tape
Limits:
  • Maximum water temperature 110⁰C/230⁰F
  • Maximum Pressure Rating 125 psi

AquaMotion Installation Instructions

View Instruction Sheet

 

 

 Made in the USA


We Also Recommend