AquaMotion Aqua-Max APB30 Pressure Booster - SDS Supply Corp.

AquaMotion Aqua-Max APB30 Pressure Booster

AquaMotion

  • $548.95
    Unit price per 

Only 5 left!

Availabilty

Usually Ships Same Business Day if ordered by 12pm CST

Aqua-Max™ APB30 boosts domestic water pressure in residential homes by 30 psi to all fixtures and sprinkler heads. Use it where the city/ town/ well water delivers insufficient pressure. Automatically Starts when water is drawn & stops when demand ends, No Short Cycling increases pressure after water demands ends, Simple Installation plumbs into incoming water line & plugs into 115V wall fixture, Compact Design easy installation 14″ x 14″ x 11″, Quiet Operation totally enclosed  fan cooled motor, Stainless Steel Pump Construction for corrosion resistance & reliability, Composite Control with reinforced brass connections, Built in check valve eliminates back flow of cold to main, Mounting Base can be attached to floor or wall, Wash down Enclosures control and motor are sealed to prevent water entry, Drain and Fill Plugs for quick filling and venting.

 

Note: When used with a water well system a flow control devise may be required to avoid over pumping the well. Selection of the flow rate for the control devise should be based on the rated flow of the well pump. For instance, a 10 gpm well pump will require a 10 gpm flow control setting.

 

Features:

  • Increased Water Pressure at all fixtures and sprinkler heads (30psi)
  • Automatically Starts when water is drawn & stops when demand ends
  • No Short Cycling increases pressure after water demand ends
  • Simple Installation into incoming water line & plugs into 115V outlet
  • Compact Design 14”x14”x11”, easy installation
  • Quiet Operation totally enclosed fan cooled motor
  • Stainless Steel Pump Construction corrosion resistant & reliable
  • Composite Control with reinforced brass connections
  • Built in check valve eliminates backflow to main
  • Mounting Base attach to floor or wall
  • Washdown Enclosures sealed to prevent water entry
  • Drain and Fill Plugs quick filling and venting

 

APPLICATION:

  • Pump only clear water
  • The water supply line to the pump should be 1” or larger
  • Protect the pump and control from freezing
  • Do not use pipe dope on the controller threaded connections. Use Teflon tape
  • Mount the pump securely and level to minimize movement and vibration
  • Protect your system with a pressure relief set at or below 125psi. System must be capable of sustaining the pressure relief settings

 DOCUMENTS:

Spec Sheet Spec Sheet
Benefits Brochure Pump Curve
Installation Sheet Installation Instructions

 

logo-aquamotion-usa.jpg

 

  


We Also Recommend