Heat Fab Vent Quick Ship Products

Heat Fab

Heat Fab 4326SS Saf-T Vent 3" Diameter - 304 Storm Collar

$25.00 $19.85

 Storm Collar - For use on horizontal or vertical systems when a Heat-fab wall or roof penetration is not used or is not required. The storm collar may be tightened and sealed around the vent to prevent water from entering the building. It may also...

Add to Cart

Heat Fab

Heat Fab 4327SS Saf-T Vent 3" Diameter - 304 Support Clamp

$23.00 $18.85

 Outer Jacket Support Clamp - For use on horizontal systems to provide support at the required 6-foot intervals. May be used singly as a saddle to rest the vent in and hung from two rods or cables. Use in pairs by clamping around the outer jacket...

Add to Cart

Heat Fab

Heat Fab 4426SS Saf-T Vent 4" Diameter - 304 Storm Collar

$25.00 $19.85

 Storm Collar - For use on horizontal or vertical systems when a Heat-fab wall or roof penetration is not used or is not required. The storm collar may be tightened and sealed around the vent to prevent water from entering the building. It may also...

Add to Cart

Heat Fab

Heat Fab 4427SS Saf-T Vent 4" Diameter - 304 Support Clamp

$23.00 $18.85

  Outer Jacket Support Clamp - For use on horizontal systems to provide support at the required 6-foot intervals. May be used singly as a saddle to rest the vent in and hung from two rods or cables. Use in pairs by clamping around the outer...

Add to Cart

Heat Fab

Heat Fab 4526SS Saf-T Vent 5" Diameter - 304 Storm Collar

$28.00 $20.85

 Storm Collar -For use with the Tall Cone Flashing (sold separately) or other roof flashings to provide support to vertical installations. The storm collar may be tightened and sealed around the vent to prevent water from entering the building. It...

Add to Cart

Heat Fab

Heat Fab 4527SS Saf-T Vent 5" Diameter - 304 Support Clamp

$22.00 $17.45

 Outer Jacket Support Clamp - For use on horizontal systems to provide support at the required 6-foot intervals. May be used singly as a saddle to rest the vent in and hung from two rods or cables. Use in pairs by clamping around the outer jacket...

Add to Cart

Heat Fab

Heat Fab 4626SS Saf-T Vent EZ Seal - 6 Inch Diameter - 304 STORM COLLAR

$29.00 $22.65

 304 STORM COLLAR- Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam elbows is not adjustable. The pressure drop for each elbow is equivalent to 3 feet of vent. Heat Fab 4626SS Saf-T Vent EZ...

Add to Cart

Heat Fab

Heat Fab 4627SS Saf-T Vent 6" Diameter - 304 Support Clamp

$21.00 $16.45

 Outer Jacket Support Clamp - For use on horizontal systems to provide support at the required 6-foot intervals. May be used singly as a saddle to rest the vent in and hung from two rods or cables. Use in pairs by clamping around the outer jacket...

Add to Cart

Heat Fab

Heat Fab 4726SS Saf-T Vent 7" Diameter - 304 Storm Collar

$35.00 $27.65

  Storm Collar -For use with the Tall Cone Flashing (sold separately) or other roof flashings to provide support to vertical installations. The storm collar may be tightened and sealed around the vent to prevent water from entering the building. It...

Add to Cart

Heat Fab

Heat Fab 4727SS Saf-T Vent 7" Diameter - 304 Support Clamp

$23.00 $18.85

 Outer Jacket Support Clamp - For use on horizontal systems to provide support at the required 6-foot intervals. May be used singly as a saddle to rest the vent in and hung from two rods or cables. Use in pairs by clamping around the outer jacket...

Add to Cart

Heat Fab

Heat Fab 4826SS Saf-T Vent EZ Seal - 8 Inch Diameter - 304 STORM COLLAR

$37.00 $28.85

 304 STORM COLLAR Heat Fab 4826SS Saf-T Vent EZ Seal 8" Diameter 304 STORM COLLAR Saf-T Vent EZ Seal AL29-4C Stainless Steel EZ Seal Catalog & Dimensional Data EZ Seal Brochure Heatfab Weight Per Foot View...

Add to Cart

Heat Fab

Heat Fab 4827SS Saf-T Vent EZ Seal - 8 Inch Diameter - 304 SUPPORT CLAMP

$24.00 $19.25

 304 SUPPORT CLAMP Heat Fab 4827SS Saf-T Vent EZ Seal 8" Diameter 304 SUPPORT CLAMP Saf-T Vent EZ Seal AL29-4C Stainless Steel EZ Seal Catalog & Dimensional Data EZ Seal Brochure Heatfab Weight Per Foot View...

Add to Cart

Heat Fab

Heat Fab 5300CI Saf-T Vent EZ Seal - 3" Storm Collar & Rain Cap

$196.00 $128.95

 Heat Fab 5300CI Saf-T Vent EZ Seal - 3" Storm Collar & Rain Cap Heat Fab Saf-T Vent EZ Seal is the fastest and most reliable venting solution for Category I, II, III, and IV gas appliances – with no RTV sealant required. Saf-T Vent venting...

Add to Cart

Heat Fab

Heat Fab 5381CI Saf-T Vent 3" Diameter - Roof Flashing 2" to 8" Pitch

$257.00 $166.95

 Pitched Cone Flashing- For use with single-wall or double-wall Saf-T Vent systems with vertical terminations. Can be used on roofs with a 2/12 - 8/12 pitch. This part comes with a tall storm collar and is made of all stainless steel construction...

Add to Cart

Heat Fab

Heat Fab 5390CI Saf-T Vent EZ Seal 3" Diameter Wall Penetration & Horizontal Termination

$298.00 $194.95

 Heat Fab 5390CI Saf-T Vent EZ Seal. Wall Penetration & Horizontal Termination - For Saf-T Vent EZ Seal systems with horizontal terminations. Use to penetrate any combustible or non-combustible wall. This part is a thimble only and does not...

Add to Cart

Heat Fab

Heat Fab 5400CI Saf-T Vent EZ Seal - 4" Storm Collar & Rain Cap

$202.00 $130.95

 Rain Cap - Use as a termination on vertical systems. Category I and II appliances require a raincap or other device to prevent rainwater from entering the vent. Vent systems for positive pressure appliances may omit the raincap if there are other...

Add to Cart

Heat Fab

Heat Fab 5481CI Saf-T Vent 4" Diameter - Roof Flashing 2" to 8" Pitch

$306.00 $204.95

 Pitched Cone Flashing- For use with single-wall or double-wall Saf-T Vent systems with vertical terminations. Can be used on roofs with a 2/12 - 8/12 pitch. This part comes with a tall storm collar and is made of all stainless steel construction...

Add to Cart

Heat Fab

Heat Fab 5690CI Saf-T Vent 6" Diameter Wall Penetration & Horizontal Termination

$390.00 $262.95

  Heat Fab 5690CI Saf-T Vent EZ Seal. Wall Penetration & Horizontal Termination - For Saf-T Vent EZ Seal systems with horizontal terminations. Use to penetrate any combustible or non-combustible wall. This part is a thimble only and does not...

Add to Cart

Heat Fab

Heat Fab 5691CI Saf-T Vent 6" Diameter Insulated Wall Penetration

$352.00 $235.95

 Wall Penetration Assembly - without Screen - Use to penetrate any combustible or non-combustible wall. This part is a thimble only and does not include any vent. Order enough vent to pass through the thimble and extend at least 4 inches beyond a...

Add to Cart

Heat Fab

Heat Fab 5890CI Saf-T Vent 8" Diameter Wall Penetration & Horizontal Termination

$496.00 $320.95

 Heat Fab 5890CI Saf-T Vent EZ Seal. Wall Penetration & Horizontal Termination - For Saf-T Vent EZ Seal systems with horizontal terminations. Use to penetrate any combustible or non-combustible wall. This part is a thimble only and does not...

Add to Cart

Heat Fab

Heat Fab 5891CI Saf-T Vent 8" Diameter Insulated Wall Penetration

$456.00 $334.95

 Wall Penetration Assembly - without Screen - Use to penetrate any combustible or non-combustible wall. This part is a thimble only and does not include any vent. Order enough vent to pass through the thimble and extend at least 4 inches beyond a...

Add to Cart

Heat Fab

Heat Fab 7000RTVL RTV Sealant - 550 DEG MAX - 10 oz Tube

$144.00 $81.95

 Heat Fab 7000RTVL RTV Sealant. Use to seal the system. In order to have a UL Listed system, Saf-T Vent CI Plus parts without a factory adhered seal must be installed with approved RTV sealants. Also, use RTV Sealant when connecting Saf-T vent EZ...

Add to Cart

Heat Fab

Heat Fab 7000TUBE-10 Drain Tube Hose Kit - 3/8" x 10' Long

$47.00 $30.95

 Condensate Drain Tube Kit- This kit contains a length of 3/8" diameter high temperature silicone rubber tubing, a 3/8" spring clamp, and two cable ties. The silicone tubing is rated for 500 degree F, and is translucent to allow inspection of the...

Add to Cart

Heat Fab

Heat Fab 7001SIL-5 Silicone Gasket Lube - 5 oz Tube

$31.00 $19.95

  Heat Fab 7001SIL-5 Silicone Gasket Lube - 5 oz Tube. Apply lubricant to the seal to improve ease of installation before connecting parts. Allows for easier assembly and disassembly. Heat Fab 7001SIL-5 Silicone Gasket Lube 5 ounce tube Apply...

Add to Cart

Heat Fab

Heat Fab 7001TUBE Drain Tube Hose Kit - 1/2" x 10' Long

$91.00 $58.95

 Condensate Drain Tube Kit- This kit contains a length of 1/2" diameter high temperature silicone rubber tubing, a 1/2" spring clamp, and two cable ties. The silicone tubing is rated for 500 degree F, and is translucent to allow inspection of the...

Add to Cart

Heat Fab

Heat Fab 73EXPKIT Saf-T Vent EZ Seal Field Expander Kit

$83.00 $52.95

  A field expander kit is available for 3" diameter Saf-T Vent installations. The field expander is a tool the installer can use to recreate the male taper on a cutoff piece of pipe. Heat Fab 73EXPKIT - Field Expander Kit A field expander kit is...

Add to Cart

Heat Fab

Heat Fab 9301 Saf-T Vent EZ Seal - 3 Inch Diameter - 6" Straight Length

$30.00 $20.95

 6" Length - Install vent with a continuous pitch of 1/4” per foot, sloping upward toward the termination (unless otherwise specified by the appliance manufacturer). It is important to provide adequate support to a Saf-T Vent EZ Seal system...

Add to Cart

Heat Fab

Heat Fab 9301AMTK Saf-T Vent EZ Seal - 3" Ametek Inducer Adapter

$48.00 $29.95

 Heat Fab 9301AMTK Saf-T Vent EZ Seal - 3" Ametek Inducer Adapter 9301AMTK 3" Ametek Inducer Adapter Saf-T Vent EZ Seal AL29-4C Stainless Steel Works on the following units: Buderus GA124, 17, 23, 30; GA244, 27, 44, 53; G124X, 18, 25,...

Add to Cart

Heat Fab

Heat Fab 9301BG Saf-T Vent EZ Seal 3" Diameter Blast Gate

$126.00 $80.95

 Heat Fab 9301BG Saf-T Vent EZ Seal 3" Diameter Blast Gate. Use to balance the draft of an appliance when the vent is terminated with a fan. Heat Fab 9301BG 3" Diameter Blast Gate Saf-T Vent EZ Seal Use to balance the draft of an appliance when...

Add to Cart

Heat Fab

Heat Fab 9301BSH Saf-T Vent EZ Seal - 3" Bosch Adapter

$47.00 $29.95

 Heat Fab 9301BSH Saf-T Vent EZ Seal - 3" Bosch Adapter 9301BSH 3" Bosch Adapter Saf-T Vent EZ Seal AL29-4C Stainless Steel Works on the following units: Bosch AquaStar 250 Bosch Pro Tankless GWH-635-ES EZ Seal Catalog &...

Add to Cart

Heat Fab

Heat Fab 9301MOD Saf-T Vent EZ Seal - 3" Modine HD Adapter

$59.00 $37.95

 Heat Fab 9301MOD Saf-T Vent EZ Seal - 3" Modine HD Adapter 9301MOD 3" Modine HD Adapter Saf-T Vent EZ Seal AL29-4C Stainless Steel Works on the following units: Modine Hot Dawg HD30 thru HD75   EZ Seal Catalog & Dimensional Data ...

Add to Cart

Heat Fab

Heat Fab 9301PAL Saf-T Vent EZ Seal - 3" Paloma Adapter

$74.00 $47.95

 Saf-T Vent EZ Seal - 3" Paloma Adapter 3” Paloma Adapter 9301PAL Saf-T Vent EZ Seal AL29-4C Stainless Steel Works on the following untits: Rheem Pronto! 4.2 / RTG-42 Norwitz N-042 Paloma PH-16UFN, PH-16UFH, PH-16FS EZ Seal...

Add to Cart

Questions & Phone Orders

SDS Supply Corp.
13731 S. Route 30, Unit 105
Plainfield, IL 60544
Call us: (800) 236-9029

Shop with Confidence

Safe & Secure shopping online. Learn more

Payment Methods

Top