null

Venting

Venting & Ducting Supplies

For large- and small-scale venting projects, you’ll find all the venting parts and supplies you need right here at SDS Market. We carry venting parts and supplies from HeatFab, Z-Flex and Ubbink, three brands trusted for their versatility and reliability in all sorts of applications and setups. Whether you’re looking for ducting supplies for pool heaters, furnaces, boilers or any other appliance, our HVAC duct supply can handle the job. All of our air duct parts are simple to install, require little to no added sealant, and pass rigorous ANSI standards to operate safely and efficiently with minimal maintenance. Many of our venting parts and supplies can ship from our warehouses in as little as 24 hours, and we offer free shipping on select orders of $199 or more. The next time a project calls for reliable and simple ducting supplies, shop with confidence at SDS Market! 

Heat Fab

Heat Fab 9612 Saf-T Vent EZ Seal - 6 Inch Diameter - 70 Degree Elbow

$141.00 $121.95

  70° Elbow - Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam elbows is not adjustable. The pressure drop for each elbow is equivalent to 8 feet of vent for 6 inch diameter elbows...

Add to Cart

Heat Fab

Heat Fab 9814 Saf-T Vent EZ Seal - 8 Inch Diameter - 90 Degree Elbow

$238.00 $171.95

  Heat Fab 9814 Saf-T Vent EZ Seal - 8 Inch Diameter - 90 Degree Elbow   Heat Fab Saf-T Vent EZ Seal is the fastest and most reliable venting solution for Category I, II, III, and IV gas appliances – with no RTV sealant required. Saf-T Vent...

Add to Cart

Heat Fab

Heat Fab 9401CPVC Saf-T Vent EZ Seal - 4" CPVC Adapter

$116.00 $83.95

Heat Fab 9401CPVC Saf-T Vent EZ Seal - 4" PVC Adapter Used to connect to CPVC pipe outlet ready appliances. OD equals CPVC pipe OD. Field RTV silicone connection as necessary. Heat Fab 9401CPVC 4" CPVC Adapter Saf-T Vent EZ Seal   EZ Seal...

Add to Cart

Heat Fab

Heat Fab 9514 Saf-T Vent EZ Seal - 5 Inch Diameter - 90 Degree Elbow

$146.00 $105.95

90° Elbow- Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam elbows is not adjustable. Heat Fab 9514 Saf-T Vent EZ Seal 5" Diameter 90° Elbow Saf-T Vent EZ Seal AL29-4C Stainless Steel  ...

Add to Cart

Z-Flex

Z-Flex 2ZVWB04 Horiontal Vent Kit for Eccotemp 45HI

$464.99 $259.95

This is for horizontal installation of the Eccotemp 45HI (indoor models).  4" Horizontal Stainless Steel Z-Vent Wall Hung Water Heater Vent Kit with Backflow Preventer Kit Includes: (1) Termination Hood (1) 4" x 90-Degree Elbow (1) 4" x 12" Pipe...

Add to Cart

Z-Flex

Z-Flex 2SVSRPKE04 Vertical Vent Kit for Eccotemp 45HI

$279.95

This is for vertical installation of the Eccotemp 45HI (indoor models). You will need to purchase additional Z-Vent straight pipe. You will need to determine how many additional feet you will need as well determine if you will need a condensation drain...

Add to Cart

Heat Fab

Heat Fab 9411TERM Saf-T Vent EZ Seal - 4" 45 Degree Screen Elbow Termination

$93.00 $66.95

Elbow Termination with Screen - Use as a termination on horizontal or vertical systems, as specified or allowed by the appliance manufacturer. 4" Diameter 45° Elbow with Screen Termination Saf-T Vent EZ Seal AL29-4C Stainless Steel   EZ...

Add to Cart

Heat Fab

Heat Fab 9310 Saf-T Vent EZ Seal - 3 Inch Diameter - 30 Degree Elbow

$87.00 $62.95

  30° Elbow- Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam elbows is not adjustable. The pressure drop for each elbow is equivalent to 3 feet of vent. 3" Diameter 30° Elbow Saf-T...

Add to Cart

Heat Fab

Heat Fab 9314 Saf-T Vent EZ Seal - 3 Inch Diameter - 90 Elbow

$104.00 $74.95

  90°  Elbow- Use to achieve offsets or changes in the direction of the vent system. The degree of these welded seam elbows is not adjustable. The pressure drop for each elbow is equivalent to 10 feet of vent. Heat Fab 9314 Saf-T Vent EZ...

Add to Cart

Heat Fab

Heat Fab 9308 Saf-T Vent EZ Seal - 3 Inch Diameter - 48" Straight Length

$140.00 $100.95

  48"" Length- Install vent with a continuous pitch of 1/4" per foot, sloping upward toward the termination (unless otherwise specified by the appliance manufacturer). It is important to provide adequate support to a Saf-T Vent EZ Seal system...

Add to Cart

Heat Fab

Heat Fab 9608 Saf-T Vent EZ Seal - 6 Inch Diameter - 48" Straight Length

$174.00 $125.95

  48" Length- Install vent with a continuous pitch of 1/4" per foot, sloping upward toward the termination (unless otherwise specified by the appliance manufacturer). It is important to provide adequate support to a Saf-T Vent EZ Seal system...

Add to Cart

Heat Fab

Heat Fab 9614TERM Saf-T Vent EZ Seal - 6 Inch Diameter - 90 Degree Elbow Screened Termination

$245.00 $176.95

  Elbow Termination with Screen - Use as a termination on horizontal or vertical systems, as specified or allowed by the appliance manufacturer. Heat Fab 9614TERM 6" Diameter 90° Elbow Screened Termination Saf-T Vent EZ Seal AL29-4C Stainless...

Add to Cart

ZoneFirst

ZoneFirst ZDB 08 x 28 Zone Damper - Bottom Mount

$349.50 $269.95

Zone First ZDB-08X28 Zone Dampers are sturdy aluminum framed parallel blade dampers with 3" blades for long life and silent operation. Each blade pivots on a self lubricating bushing for smooth quiet operation and long life. The ZD is a power close, and...

Add to Cart

Heat Fab

Heat Fab SC04RC Saf-T Vent 4" Diameter - Rain Cap

$169.00 $121.95

 Rain Cap - Use as a termination on vertical systems. Category I and II appliances require a raincap or other device to prevent rainwater from entering the vent. Vent systems for positive pressure appliances may omit the raincap if there are other...

Add to Cart

Heat Fab

Heat Fab 9692 Saf-T Vent EZ Seal - 6 Inch Diameter - Screen Termination

$106.00 $76.95

 Screen Termination - Use as a termination on horizontal or vertical systems, as specified or allowed by the appliance manufacturer. 6" Diameter Screen Termination Saf-T Vent EZ Seal AL29-4C Stainless Steel   EZ Seal Catalog &...

Add to Cart

Heat Fab

Heat Fab 9390 Saf-T Vent EZ Seal - 3 Inch Diameter - Mitered Termination with Screen

$57.00 $41.95

  Mitered Termination with Screen - Use as a termination on horizontal or vertical systems, as specified or allowed by the appliance manufacturer. 3" Diameter Mitered Termination with Screen Saf-T Vent EZ Seal AL29-4C Stainless Steel   ...

Add to Cart

Heat Fab

Heat Fab 9492 Saf-T Vent EZ Seal - 4 Inch Diameter - Screen Termination

$45.00 $32.95

  Screen Termination - Use as a termination on horizontal or vertical systems, as specified or allowed by the appliance manufacturer. 4" Diameter Screen Termination Saf-T Vent EZ Seal AL29-4C Stainless Steel   EZ Seal Catalog &...

Add to Cart

Heat Fab

Heat Fab 9490 Saf-T Vent EZ Seal - 4 Inch Diameter - Mitered Termination with Screen

$58.00 $41.95

 Mitered Termination with Screen - Use as a termination on horizontal or vertical systems, as specified or allowed by the appliance manufacturer. 4" Diameter Mitered Termination with Screen Saf-T Vent EZ Seal AL29-4C Stainless Steel   ...

Add to Cart

Heat Fab

Heat Fab 9414TERM Saf-T Vent EZ Seal - 4" 90 Degree Screen Elbow Termination

$144.00 $103.95

  Elbow Termination with Screen - Use as a termination on horizontal or vertical systems, as specified or allowed by the appliance manufacturer. 4" Diameter 90° Elbow with Screen Termination Saf-T Vent EZ Seal AL29-4C Stainless Steel   ...

Add to Cart

Heat Fab

Heat Fab 9392 Saf-T Vent EZ Seal - 3 Inch Diameter - Screen Termination

$40.00 $28.95

 Screen Termination - Use as a termination on horizontal or vertical systems, as specified or allowed by the appliance manufacturer. 3" Diameter Screen Termination Saf-T Vent EZ Seal AL29-4C Stainless Steel   EZ Seal Catalog &...

Add to Cart

Heat Fab

Heat Fab 9390TEE Saf-T Vent EZ Seal - 3 Inch Diameter - Screened Termination Tee

$104.00 $74.95

  Tee Termination with Screen - Use as a termination on horizontal or vertical systems, as specified or allowed by the appliance manufacturer. 3" Diameter Screened Termination Tee Saf-T Vent EZ Seal AL29-4C Stainless Steel   EZ Seal...

Add to Cart

Ubbink

Ubbink STDKITVA-S21 Horizontal Standard Termination Vent Kit - 21" Length

$172.00 $100.00

Ubbink STDKITVA-S21 Horizontal Standard Termination Vent Kit - 21" Length is used for venting Rinnai LSi & RCi series tankless water heaters and A.O. Smith ATI-305 & ATI-505 On-Demand Tankless Water Heaters which utilize separate intake and...

Add to Cart

Ubbink

Ubbink STDKITVA-S Horizontal Standard Termination Vent Kit - 12" Length

$162.00 $100.00

Ubbink STDKITVA-S Horizontal Standard Termination Vent Kit - 12" Length is used for venting Rinnai LSi & RCi series tankless water heaters and A.O. Smith ATI-305 & ATI-505 On-Demand Tankless Water Heaters which utilize separate intake and exhaust...

Add to Cart

Heat Fab

Heat Fab SC04VT Saf-T Vent SC 4"/7" Diameter - Vertical Termination Adapter

$194.00 $139.95

 Vertical Termination Adapter - Use to complete the Saf-T Vent SC system on vertical installations. Standard Saf-T Vent terminations connect directly to the adapter. The screened openings release excess heat from the system and must not be blocked...

Add to Cart

Heat Fab

Heat Fab SC04VSL Saf-T Vent SC 4"/7" Diameter - Vertical Support Leg

$71.00 $51.95

 Heat Fab SC04VSL Saf-T Vent SC 4"/7" Diameter - Vertical Support Leg. Vertical Support Leg - For use on vertical systems to provide support. The 20-gauge stainless steel support legs can be used below or above the roof, and can be used in pairs...

Add to Cart

Heat Fab

Heat Fab SC04TCFB Saf-T Vent SC 4"/7" Diameter - Flashing, 6/12 - 12/12 Pitch

$87.00 $62.95

  Use as a vertical roof penetration and support for flat roof installations. This part must be installed with a storm collar (ordered separately). Hardware is not included with the tall cone flashing; attach to structure using best construction...

Add to Cart

Heat Fab

Heat Fab SC04TCFA Saf-T Vent SC 4"/7" Diameter - Flashing, 2/12 - 6/12 Pitch

$82.00 $59.95

 Use as a vertical roof penetration and support for flat roof installations. This part must be installed with a storm collar (ordered separately). Hardware is not included with the tall cone flashing; attach to structure using best construction...

Add to Cart

Heat Fab

Heat Fab SC04TCF Saf-T Vent SC 4"/7" Diameter - Flashing, Flat - 2/12 Pitch

$73.00 $52.95

 Use as a vertical roof penetration and support for flat roof installations. This part must be installed with a storm collar (ordered separately). Hardware is not included with the tall cone flashing; attach to structure using best construction...

Add to Cart

Heat Fab

Heat Fab SC04TAD4 Saf-T Vent SC 4"/7" Diameter - Air Intake Tee, 4" Intake Connection

$194.00 $139.95

 Air Intake Tee - Use to begin a Sealed Combustion system. The male end connects to Saf-T Vent EZ Seal or Saf-T Vent appliance adapters and flue collars. The tap on the outer wall should be connected to the combustion air inlet on the appliance...

Add to Cart

Heat Fab

Heat Fab SC04TAD3 Saf-T Vent SC 4"/7" Diameter - Air Intake Tee, 3" Intake Connection

$176.00 $126.95

 Air Intake Tee - Use to begin a Sealed Combustion system. The male end connects to Saf-T Vent EZ Seal or Saf-T Vent appliance adapters and flue collars. The tap on the outer wall should be connected to the combustion air inlet on the appliance...

Add to Cart

Heat Fab

Heat Fab SC04SUP1 Saf-T Vent SC 4"/7" Diameter - 1" Clearance Support Clamp

$25.00 $18.95

 Heat Fab SC04SUP1 Saf-T Vent SC 4"/7" Diameter - 1" Clearance Support Clamp. 1" Clearance Support Clamp - Provides support to Saf-T Vent SC systems that require 1 inch clearance to combustible materials. When any horizontal run of Saf-T Vent SC...

Add to Cart

Heat Fab

Heat Fab SC04SUP Saf-T Vent SC 4"/7" Diameter - 0" Clearance Support Clamp

$12.00 $8.95

 Heat Fab SC04SUP Saf-T Vent SC 4"/7" Diameter - 0" Clearance Support Clamp. 0" Clearance Horizontal / Vertical Support Clamp - For use on horizontal or vertical systems to provide support at zero clearance to combustible materials. When any...

Add to Cart

Questions & Phone Orders

SDS Supply Corp.
13731 S. Route 30, Unit 105
Plainfield, IL 60544
Call us: (800) 236-9029

Shop with Confidence

Safe & Secure shopping online. Learn more

Payment Methods

Top